If the drive will be on its own cable, connect the IDE cable to the motherboard and one of the other connectors of the cable into the CD/DVD drive. Plug the drive into the power supply. Locate one of the 4-pin Molex connectors from the power supply and insert it into the power connector on the CD/DVD drive.

How do I connect a disk drive to my motherboard?

Quote from the video:
Quote from video: It up and plug it in it should just fit right into place next get a motherboard SATA connector. And plug that in again same exact process just push it in all that's left to do now is plug.

Where does CD drive go on motherboard?

Assuming that you have an IDE CD/DVD drive then you would Plug the unit into the IDE connector noted in the following picture. If your cd rom drive is SATA then it would connect to one of the numerous SATA connectors on the border of the mainboard.

How do I get my computer to recognize my CD drive?

Go to Check the CD/DVD drive name in Device Manager.

  1. Check the CD/DVD drive name in Device Manager. …
  2. Use the Hardware and Devices troubleshooter to resolve CD/DVD drive issues. …
  3. Reset the computer power to resolve issues with the CD/DVD drive. …
  4. Check the drive cable connections (desktop tower computers only)

What connector does a CD drive use?

Verify connections. Your CD-ROM should have at least two cables connected to it: a Molex power cable and an ATAPI / IDE or SATA cable. The IDE or SATA cable should also connect to the motherboard or another interface card, and the power cable should connect to the power supply.

What does SATA connector look like?

SATA Data cables are thin ribbon like cables with small identical 7 pin connectors on each end. The connectors measure no more than 1.5 x 0.4 cm and have distinguishable L-shaped notch for connection. Some SATA Data cables have a 90 degrees angled connectors.

How do I connect SATA cable to CD drive?

Connect the SATA-power cable to the optical drive. Slide the optical drive assembly with the SATA-power cable into the optical drive bay until it clicks into place. Connect the optical drive power-SATA cable to the system board.

What is a SATA connector?

SATA Hard Drive Connectors



Serial ATA (SATA) is the SATA-IO standard interface for storage devices connecting with consumer devices. SATA replaces the parallel ATA bus to meet the increased bandwidth and performance demands of hard disk drive (HDD) storage applications.

Do DVD drives use SATA?

DVD/Blu-Ray drives and recorders typically use the SATA connection. The SATA power cable is slim and flat. Find an available power plug and insert it into the optical drive.

What is SATA cable?

Serial ATA (SATA, abbreviated from Serial AT Attachment) is a computer bus interface that connects host bus adapters to mass storage devices such as hard disk drives, optical drives, and solid-state drives.

How do you install a CD drive?

How to Install a CD/DVD Drive in a PC

  1. Power down the PC completely. …
  2. Open the computer to install the CD or DVD drive. …
  3. Remove the drive slot cover. …
  4. Set the IDE drive mode. …
  5. Place the CD/DVD drive into the computer. …
  6. Attach the internal audio cable. …
  7. Attach the CD/DVD drive to the computer using an IDE cable.

How do you install an optical drive in a gaming PC?

Quote from the video:
Quote from video: Make sure say to plug there's I have four of them right here so that is just getting camp on it no the it plugs it on the side. So.

How many pins are in CD DVD drive power connector?

Disk drive

Production history
Height 6 mm (female), 8 mm (male)
Pins 4
Electrical
Signal Yes

What is the 4 pin connector on a motherboard?

The ATX 4-pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator.

What is SATA connector in motherboard?

Serial ATA (Serial Advanced Technology Attachment or SATA) is a command and transport protocol that defines how data is transferred between a computer’s motherboard and mass storage devices, such as hard disk drives (HDDs), optical drives and solid-state drives (SSDs).

Where is the SATA connector on motherboard?

Identifying the SATA Ports on Your Desktop Board

Port Location Description
SATA2 Onboard header Intel SATA 3.0 Gb/s (black)
SATA3 Onboard header Intel SATA 3.0 Gb/s (black)
eSATA Back panel connector Intel eSATA 3.0 Gb/s (red)
eSATA Back panel connector Intel eSATA 3.0 Gb/s (red)

Do I need to connect SATA to motherboard?

You’ll need a SATA cable to connect your new hard drive to your motherboard. SATA cable with a 90 degree plug on one end. You can get different options for the plugs on either end. One end of the SATA cable will plug into your new hard drive, and the other needs to go to a SATA port on your motherboard.

How do I identify a SATA port?

Physically Reading the Labels on the Motherboard. If you are on a desktop, then one of the easiest way to identify the SATA version of your ports is to physically check the labels on them. On most motherboards the SATA ports are clearly labelled with their version as well as their system identification number.

How do I know which SATA port to use?

For instance, if you have a recent motherboard model with all the ports being SATA 3, you can use any port to connect your SATA 3 drive.



There are three versions or generations of SATA interface:

  1. SATA 1: 1.5 Gbps or 0.1875 GB/s.
  2. SATA 2: 3.0 Gbps or 0.375 GB/s.
  3. SATA 3: 6.0 Gbps or 0.700 GB/s.


Do all motherboards have SATA ports?

But the point to note is that the number of SATA port varies from motherboard to motherboard. You may even find motherboards featuring 8 SATA ports. The more SATA ports you have the more drives you can connect.

Why are SATA ports different colors?

The reason is, the darker blue color is to mark the SATA 0. And according to here (https://support.hp.com/us-en/document/c02961221), HP suggests using the lowest number of SATA port for OS disk. Show activity on this post. From what I’ve seen, if more than one port is coloured, it denotes the RAID ports.

What order do you connect SATA cables?

Asrock says to connect first the data cable to the mainboard, then to connect, in this order, the power cable, then the data cable, to the drive. Another hardware guide says to connect the data cable first. It’s surprising that a definitive answer on this is so hard to find.

Do I need to plug SATA in order?

The reason you want to have your OS drive in the first sata port is that drives get assigned ID’s based on order they are in the ports and if you had the boot drive in other than the first port and you then, for any reason, removed the drive that was plugged to a port number lower than the boot drive would change it’s …

Does it matter where the SATA cables go?

It doesn’t matter that much. You just plug sata cable to the mobo and the device and plug power cable to the device and you are set. The only difference might be the slot speed, since there can be difference versions of SATA ports on the mobo SATA I, II, III.

Do SATA drives need power?

The connector on SATA drives is designed so it can be used with either a combined power and data connector or with two seperate connectors for power and data. In desktop systems power and data are normally wired up seperately. Power cables are normally part of the power supply.

Can I connect a SATA drive via USB?

If you need to connect your SATA hard drive to another computer for data recovery, but don’t want to disassemble the tower because of the warranty, lack available SATA ports or simply prefer using a laptop PC, you can easily convert this SATA drive into an external disk plugged into a USB port of the computer instead

How do I install a SATA hard drive?

Quote from the video:
Quote from video: There is an already one coming off of your motherboard. You'll need to plug one in. The ends of the SATA cable also have an l-shape end so they can't be attached the wrong way if you're using an SSD.